3d breast lift without vertical scar

After decades of training and research into breast surgery, the traditional forms of vertical scar breast lifts have become obsoletee  through Dr. Haffner modified. dr Haffner has had a stronger one since 2003 3d breast lift without vertical scar, which then leads to round, bulging breasts that have beautiful cleavage and are symmetrical in all three dimensions, although the op proceeds without a vertical scar. The 3 dDimensional symmetry in a breast lift is created by straightening the breast into the correct position. Therefore, the synonym "righting tightening" or "reposition tightening" " 3d breast lift without a vertical scar " are absolutely correct. Because an additional tightening and shaping of the breast takes place in all other breast quadrants, which is the case with a conventional – “normal” – breast lift or Breast reduction (breast amputation) are not formed at all.

Benefits of 3d breast lift without vertical scar

https://www.flickr.com/photos/195571589@N04/52752024265/in/dateposted-public/

The renewal of older breast lift methods brings the benefits for women as follows:

1. Vertical or T scar are spared

2. Faster wound healing due to smaller wounds

3. Raise breasts instead of shortening (amputating)

4. Tighten and fasten instead of just supporting

5. 3d shape: Sagging breast is straightened and fixed instead of being shortened and sewn up.

6. 3d shape: natural décolleté instead of empty bust size

7. 3d shape: fullness instead of flatness

8. 3d shape: dome shape instead of square shape of the breasts

9. 3d shape: symmetry considered in all planes

10. Nipples are never excised and transplanted. They remain connected to the breast.

That is why breastfeeding is possible more often after a 3d lift without a vertical scar.

Evidence, before and after photo evidence of the 3D breast lift without vertical scar

Scientifically justified and presented as a research project in professional circles

Field report about the 3d breast lift without vertical scar

Older breast lift methods

Conventional breast lifts work in such a way that the surgeon first cuts out the skin and gland in an oval shape. Then the oval gap in the lower half of the breast is sewn up again, and the gland and skin are tightened together. Of course, the seam in the lower half of the chest has a supportive effect. But a support is not a real tightening. The breasts remain flat in the upper half, often look too wide, flat, angular instead of rounded, sometimes they look like they have been amputated. The 3 ddimensional symmetry is completely absent. The conventional breast lift with a vertical scar is therefore referred to by the US plastic surgeon Swanson as the "illusion of a breast lift". Lack of roundness, filling and symmetry, but noticeable vertical or even J or T scar - surely there is a better way to deal with that! Because of these shortcomings, the conventional breast lift was abandoned with vertical scar by dr. Haffner modified. In this way, all patients receive the optimal 3D shape. Even those whose breasts can only be sensibly tightened with a vertical scar. However, many women choose a more subtle tightening and prefer not to use the vertical scar. For these patients, we recommend the next generation breast lift, the 3d breast lift without vertical scar, as follows:

product

Small to medium-sized sagging breasts with sufficient glandular tissue and residual firmness no longer require a vertical scar for a breast lift. The method 3d breast lift without vertical scar can be used with or without mesh / or Implant perform and achieve the desired optimal breast shape with 3d symmetry. Do not allow yourself to be left with an unnecessary vertical scar, in 80% of cases the scar is avoidable. Take advantage of the opportunity for a second opinion and ask the breast lift expert who has mastered and developed both methods: both with and without a vertical scar. As an additional service in both cases carried out in 3d symmetrical form with décolleté.

https://www.flickr.com/photos/195571589@N04/52751958513/in/dateposted-public/

3D breast lift plus implant

Two components always play a role in the development of sagging breasts:

A, Tissue ptosis: This is why the entire breast is elongated, hence sagging. The ligaments and connective tissue are worn out.

B, lack of tissue = lack of volume : therefore, the breasts are flat and flat

With the 3d breast lift, the breast can be straightened up again from the stretched out position and fixed in the upright position. However, this does not or not completely replace the missing volume, the necessary filling. Only by adding volume - implant or autologous fat - can the necessary filling tightening, filling tightening take place. However, sagging breasts cannot be tightened with implants alone. Adhering to the right steps in recovery is an absolute priority: first tightening and only then filling, as we will talk about in Chapter breast lift with breast augmentation reported.

The inner bra during a breast lift 

If the connective tissue is weak, the retaining straps can later relax after tightening. The long-term durability of a 3D breast lift without a vertical scar is inner bra method secured as follows:

https://www.flickr.com/photos/195571589@N04/52751521246/in/dateposted-public/

Mesh inner bra

The thread net is made of non-dissolving, extra strong threads, which then massively tighten and support the lower half of the chest. The threads are very neutral and of the same quality as those used in facelift plastic surgery. The tightening thread net keeps the breasts stable like an inner bra.

Titanium mesh inner bra

Nets made of polypropylene or titanized polypropylene are very soft and body-friendly, yet very stable and cannot be felt under the skin-fatty tissue of the breast. The HeumarktClinic recommends such nets for very weak connective tissue, when the skin is weak and stretched out. The mesh is sewn under the skin and subcutaneous tissue in both the upper and inner half of the chest and attached to the muscles at the top. Patients don't even notice it. The chest is encased by the attached mesh and secured overall in all quadrants. Another advantage of the inner mesh is the support from the breast areola. Especially with a periareolar lift, the nipple tends to expand and become larger. The mesh prevents this, is cut out circularly around the nipple. The mesh then selectively supports the nipple and prevents it from expanding. Patients have the greatest possible support installed with mesh. You will be informed about risks and side effects during the consultation.

Inner bra through split skin

This method is used in the 3D breast lift with a vertical scar procedure. The surgeon can only partially remove the skin in a wedge-shaped area in the lower half of the chest by splitting it. The upper thick skin is only removed and the deep layers of skin are then preserved with the subcutaneous layer. After the tightening has been carried out, at the end of the operation this split skin is pleated and doubled and fixed in a rolled-up state for support. This means that the skin on the lower half of the breast is twice as thick as it was before the operation. A clever chest support made from our own material.

Inner bra through gland implant

If the surgeon prepares a triangle of glandular tissue from the lower half of the breast and pushes it under the nipple like an implant, then the breast is not only lifted, filled, but also receives massive support, like an inner bra, which this inner glandular implant is placed on attached to the muscles and then supports the entire chest.

• The stability and sustainability the chest is increased
• Nicer scar due to less tension - the periareolar scar usually develops inconspicuously and can be treated during follow-up care in such a way that it remains pleasantly and aesthetically hidden.
• Sustainable shape 
• Areola size remains constant

Individual Consulting

Questions? Call us now !

You can also make an appointment with us through online  Appointment booking make out or just one Email   . write